Description
DESCRIPTION: BOYSEN® Acqua Epoxy™ is a two-component water-based acrylic epoxy paint that has superior solvent, chemical, and stain resistance. It is ideal for concrete floors and properly primed metal surfaces. It has the advantages of easier application and better weather resistance properties.
Easy Water Clean-up
FINISH: Semi-Gloss
DRY TIME:
Touch: 30 minutes
Recoat: 4 hours
THEORETICAL COVERAGE PER 4-LITERS: 25 – 30 sq.m.
*Depending on surface texture and porosity
TINTING: All colors should be factory-mixed
THINNING SOLVENT: Use as supplied
CLEAN-UP SOLVENT: Water
PACKAGING: 4-Liters (B-2910 Curing Agent is available in 1-Liter cans)
APPLICATION: By brush, roller or airless spray
SURFACE PREPARATION:
Concrete Flooring
Remove oil and grease by using detergents or degreasers. Painting over a roughened concrete floor is recommended to improve adhesion of succeeding coats.
Metal Surfaces
Wipe the surface with a rag soaked in paint thinner to remove grease, oil, wax and other foreign matter. For new galvanized surfaces, etch the surface by applying 10% BOYSEN® Metal Etching Solution B-71 (Dilute 1 part of B-71 to 9 parts water). Rinse with water and dry immediately.
Unpainted galvanized surfaces that have been exposed for 6 months or more need not be etched.
Treat rusted steel by sanding and wire brushing. Use BOYSEN® Metal Etching Solution B-71 on remaining rust. Let it stay for 10 – 15 minutes. Be sure to remove all remaining residue. Immediately prime after drying.
PAINTING SCHEDULE:
Concrete Flooring
Mix 3 parts of BOYSEN® Epoxy Primer White B-2200 to 1 part of its catalyst. (Pot life: 5 hours) Allow 20 minutes induction time then thin the prepared mixture with BOYSEN® Epoxy Reducer B-55 in a 1:1 ratio. Apply as primer coating on bare concrete. Let dry overnight.
Prime bare metal using BOYSEN® Epoxy Primer Red Oxide B-2277. Let dry for 8 hours before recoating. Finish with 2 – 3 coats of BOYSEN® Acqua Epoxy™. Let dry for 4 hours before recoating.
Reviews
There are no reviews yet.